CNC Induction – Part 2 – Primer class on toolpathing for simple CNC machining

Description

Last offered October 2022. Contact us if you’d like us to try to run this induction again!

This class if free for our monthly members – log into your account to see the 100% discount applied.

Please note:
This class assumes you have prior CAD design knowledge and experience but have not done any tool pathing before. The class is a short primer on using Fusion 360 to toolpath parts intended to be cut on our CNC machine. It is by no means a fully fledged toolpathing class but will largely focus on the 2D tool operations and only lightly touch on 3D options.

We will focus on how to toolpath parts to be eventually machined out of plywood. Please note that the class will not go into how to actually use the CNC. This will be covered separately in part 3. If you believe you already know the below you can skip this class and join for the last one.

In this class we will cover in Fusion 360:

• how to set up your stock;
• how to set up your tools;
• how to do profile cuts, pockets and holes;
• how to do multiple passes;
• how to set up tabs;
• how to export the tool path using the correct post-processor.

This class likely will not cover every aspect that will be required for your specific project as it is intended to provide cover the basics to get started. We will endeavour to provide you with specific resources for your project.

Following this class, JD – the instructor – and a number of volunteers will be able to assist you with your specific project online or in person at our open times after arranging a specific time.

Please bring a laptop to the class and have a Fusion 360 account –  free for personal use; or let us know if you are unable to do so before the day.